Rootful Jailbreak

In a rootful jailbreak, the user has full control over the system partition. This is usually achieved by creating a copy of the root directory and remounting it with read-write permissions. Through this method, the user can easily access the root directory (/) as well as the root user account.

Having the access and permissions to modify core system files means that the user can install mods and tweaks directly onto the root filesystem. However, this level of control also means that tinkering with sensitive files can lead to boot loops, data loss, or even a hard brick.

Rootless Jailbreak

A rootless jailbreak does not offer direct access to the root filesystem of the device. This means that writing to ‘/’ is not possible with rootless. Instead, it writes to a different location in the storage, usually /var/jb, which then acts as a symlink to a directory within /private/preboot.

Apple sealed the root filesystem with the introduction of Signed Secure Volumes (commonly known as SSV) in iOS 15. This meant that rootful jailbreaks had to be discontinued. As a result, rootless methods had to be adopted since modifications to the root filesystem weren’t permitted. Most rootful jailbreaks were known to brick devices after the SSV update as well.

Rootless jailbreaks are generally considered safe and reliable. Since the jailbreak is separate from the root filesystem, it is also harder to detect. With rootless, you also have the privilege of reverting back to stock iOS and updating the software whenever needed. There is little to worry about in terms of boot looping or hard-bricking your device, and it is relatively more stable as well.

Why Switch to Rootless?

For the majority, rootless is the “unavoidable future of iOS jailbreaking.” While this approach is relatively new and will require many tweaks and repositories to be updated with new modules, it’s worth noting that most tweaks will remain compatible, needing only minor adjustments unless they involve modifying the root filesystem in some way.

In the past, rootful methods, such as XinaA15, were known to be unstable and prone to crashes, partially due to their reliance on unconventional patches. These jailbreaks were often difficult to set up, with many variables to manage, as they involved manipulating sensitive system data.

While rootless methods are considered less powerful, many tweaks have adapted to this environment by making minor adjustments to file paths and supporting iphoneos-arm64 packages. If a tweak or module doesn’t rely on a hardcoded path, it can typically be recompiled to a different location, allowing it to work easily with rootless tools.

Most jailbreak tools, including Dopamine, Checkra1n, Palera1n, and unc0ver, and package managers such as Sileo and Zebra have transitioned to rootless models, though rootful options remain available with tools like nekoJB and older versions of Palera1n.

Are Rootful Jailbreaks Better than Rootless?

While rootful provided developers with significant control over the root filesystem, it is important to understand that a large percentage of tweaks did not rely on modifying the root filesystem. For them, the transition wasn’t too difficult either. Even though most default system apps are stored within the root directory, they may cause issues if altered, potentially leading your device into unavoidable problems.

To bypass SSV (Signed System Volume), some developers have found a method to mimic the root directory by creating a copy and remounting it as read-write. However, this approach is not only prone to failure but also consumes a large amount of system storage. Jailbreaks like nekoJB, a fork of Dopamine, utilize this method.

Still, with how much compromise was needed for little in return, rootful patches, post-iOS 15, didn’t gain traction. This is also why popular tools like Palera1n eventually dropped support for rootful jailbreaks.

The post Difference Between Rootful & Rootless Jailbreak and Which One Is Better for You? appeared first on Appuals.

In this article, we’ll guide you through three simple methods to scan documents using your iPhone, making it easy to keep your files organized and accessible anywhere. This process saves time and helps reduce physical mess, ensuring your important documents are always just a few taps away.

Why is scanning documents important?

Scanning documents is very important as most of our documentation happens online. Documents are easier to manage, share, and store in digital form. In both personal and professional settings, the ability to convert physical documents into digital formats transforms workflows, enhances collaboration, and safeguards important information.

For individuals, scanning critical documents like contracts, receipts, or family photos means they’re readily accessible and can be easily backed up, protecting against loss due to damage or misplacement.

Digital documents can be instantly shared with colleagues worldwide, integrated into digital databases for quick recovery, and edited or updated without complex paper handling. This shift boosts efficiency and contributes to environmental sustainability by reducing the dependency on paper.

READ MORE: How to Scan Documents on Android Easily [Updated for 2024] ➜

3 easy ways to scan documents on an iPhone

Scanning documents with your iPhone can be incredibly convenient and efficient, allowing you to digitalize paper documents without bulky equipment. Whether you’re dealing with receipts, forms, or handwritten notes, there are several methods you can use, each suited to different needs and situations.

Here are three easy ways to scan documents directly from your iPhone:

1. Using the notes app

The Notes app is not only for taking notes but also a powerful tool for scanning documents thanks to its integrated scanning feature. This method is particularly useful as it utilizes a tool that’s already part of your iPhone’s system, making it easy to access and use. Here’s how to do it:

1. Start by opening the Notes app on your iPhone. You can either select an existing note or create a new one to begin with.
   

   

2. Tap the camera icon inside the note.
   

   

3. Then choose the “Scan Documents” option. This will activate the camera specifically in document scanning mode.
   

   

4. Position your document under the camera. The app can automatically capture the document if it’s in auto mode. For manual adjustments, tap the screen or the volume buttons to capture, then use the on-screen cues to adjust the corners and optimize color settings.
   

   

The convenience of using a pre-installed app means no additional downloads are necessary. Scans integrate effortlessly with other iOS features, allowing for easy sharing and storage within the system.

2. Using your iPhone camera directly

The iPhone’s default camera app is a straightforward solution for those needing a quick scan without any additions. It’s less about scanning and more about capturing a clear image of the document, which can then be used as a scan. Here’s how you can do it:

1. Open the camera app on your iPhone.
   

   

2. Place the document in a well-lit area and position it within the camera’s frame. Snap a photo of the document.
   

   

3. You can then edit this image for better clarity and cropping using the photo editing tools available in the Photos app.
   

   

It’s a quick method that uses the native camera app, requiring no extra steps or applications. Provides flexibility to edit with more detailed tools in other apps or to use the image as is.

READ MORE: How To Scan QR Code on iPhone – 6 Quick & Easy Methods ➜

3. Using a dedicated scanner app

A dedicated scanner app is the best choice for those requiring more advanced scanning capabilities, such as optical character recognition (OCR) or the ability to handle multiple pages at once. Apps like Adobe Scan or Microsoft Office Lens provide sophisticated features that go beyond basic scanning. Follow these steps to do so:

1. Research and download an ideal scanner app from the App Store.
   

   

2. Open the app and allow permission to scan your document. These apps usually provide detailed guidance on how to achieve the best scan.
   

   

3. Take advantage of features like OCR to convert scanned images into text, edit the scans, or compile multiple pages into a single document.
   

   

Advanced features enhance the functionality, offering options like text recognition and detailed editing. Compatibility with various file formats and integration with cloud services make storing and accessing scans from anywhere easy.

Best scanner apps for iPhone

Choosing the right scanner app for your iPhone can significantly enhance your productivity, especially when dealing with a lot of documents. Here are three of the best scanner apps available for iPhone, each offering unique features and benefits:

1. Adobe Scan

Adobe Scan transforms your device into a comprehensive scanning tool with automatic text recognition (OCR). It sharpens content, detects borders automatically, and integrates with Adobe Document Cloud. Ideal for those needing a strong solution for frequent use, it’s free with optional subscriptions for advanced features like editing and additional cloud storage.

2. Microsoft Office Lens

Perfect for Office 365 users, Microsoft Office Lens integrates directly with Microsoft applications, turning scans into editable Word and PowerPoint files. It features special modes for documents and whiteboards, optimizing clarity and removing glares. This app is free, enhancing functionality for those with an Office 365 subscription.

3. CamScanner

CamScanner offers extensive features for both personal and professional use, including advanced OCR for text extraction and smart cropping for high-quality scans. It supports extensive file formats and cloud services like Google Drive and Dropbox. The app has a free version for basic use, with a premium subscription available for higher-resolution scans and more storage.

READ MORE: How to Use Text Recovery Converter For Word Documents ➜

Tips for scanning documents on an iPhone

Scanning documents on your iPhone can be highly effective if done correctly. Here are some tips to ensure you get the best possible quality from your scans:

• Proper lighting: Ensure the document is well-lit, but avoid direct glare from overhead lights. Natural light works best, but use a steady, soft light source if you’re indoors.
• Flat surface: Place the document on a flat surface. If the paper is wrinkled or curved, try to flatten it under a heavy book for a few minutes before scanning.
• Steady hands or support: Hold your iPhone steady while capturing the scan. Consider using a stand or tripod designed for smartphones for even better stability.
• Optimal distance and positioning: Position your iPhone directly above the document to avoid angles and distortion. The document should fully appear within the frame in your camera app.
• Use grids and guides: Many scanning apps provide on-screen grids or borders to help align your document properly. Use these tools to ensure the edges of your document match the guides.

Final thoughts

Scanning documents with your iPhone is a straightforward and efficient way to digitalize and manage your important papers. Whether using the built-in Notes app, your iPhone’s camera, or a specialized scanner app, the process is designed for convenience and effectiveness.

By following the tips provided, you can ensure high-quality scans that are perfect for professional or personal use. Transform your documents digitally with your iPhone to simplify your work and secure your documents.

The post How to Scan Documents on an iPhone (3 Easy Ways) appeared first on Appuals.

In addition to that, corrupted cache data is also one of the main causes of this error.

Since a slow internet connection is among the leading culprits, ensure you are not experiencing a weak connection.

If the connection is stable enough, the following steps may help resolve the issue.

We recommend restarting both the router and the device to rule out any temporary bugs or glitches.

1. Use a Different DNS

Switching to a fast, reliable, and secure DNS such as Google DNS or Cloudflare DNS can help resolve this error as it improves the ability to connect to the servers without any issues.

The Domain Name System (DNS) converts human-readable domain names into IP addresses, facilitating the connection between your computer and the server.

If your current DNS settings are causing latency or failures, switching to a different DNS can help resolve the error.

1. Open the Settings, and go to the Wi-Fi settings.
2. Then, tap on the Info icon next to the connected Wi-Fi.
   
3. Here, under the DNS section, you will see an option named Configure DNS. Tap on it.
4. Then, tap on Manual and then tap Add Server.
   Note: If the IP addresses are already added under DNS servers, simply delete all of them before adding a new DNS server.
5. Here, type the Google DNS server address, which is 8.8.8.8, as a Preferred DNS server.
6. Then, type 8.8.4.4 as an alternative DNS address.
   
7. Once done, check if the issue is resolved or not.

2. Clear Sileo Cache

Corrupted cache data can lead to issues with fetching and displaying updated package information, causing timeouts.

1. To clear the Cache, tap on your Avatar in the top right corner.
   
2. Scroll all the way to the bottom and tap Cache Size under the About section.
   
3. Then, tap OK to confirm the action.
   
4. Once done, check if you are encountering the same error.

3. Use a VPN

A VPN (Virtual Private Network) routes your internet traffic through different servers, which can help bypass regional restrictions and ISP throttling. Using a VPN can connect you through different regions where the repository servers might be more accessible, potentially improving the connection.

There are many VPN services available; try one to see if it resolves the issue.

4. Use a Different Network Connection

If the problem persists, try connecting to a different network, such as using mobile data or another Wi-Fi connection. This will help determine whether the issue is with your current network or the Sileo backend.

The post How to Fix “The request timed out” Error in Sileo? appeared first on Appuals.

Fortunately, users outside of the EU could actually sideload apps onto their iOS and iPadOS devices, though at the expense of a bit of security, via SideStore. However, as with most loopholes on Apple devices, they become popular and are soon patched.

This guide will go over the potential reasons why this service may fail to work on your device and the recommended solutions to implement, not just to restore functionality, but also to ensure that your device remains safe.

What is SideStore?

SideStore, as the name suggests, is a third-party, untethered alternate app marketplace or “App Store” that allows you to sideload apps onto your iPhone or iPad. The service essentially allows you to circumvent certain restrictions and app distribution limitations set by Apple’s Developer Program.

Contrary to popular opinion, these services are not to be taken with a negative connotation. Sometimes, they include beta versions, tweaked apps, or those that are limited to serving a specific purpose for a very niche audience. The SideStore, in particular, is a fork of the more popular AltStore and is generally preferred by an average user since it saves the hassle of refreshing the app each week via PC.

 How Does SideStore Work?

It’s no secret that Apple flaunts its device security and, in fact, uses this as an argument to oppose loosening its restrictions for sideloading. However, iOS’ seedy underbelly, with services like SideStore and AltStore, leverages the company’s policies to bypass App Store’s sideloading restrictions. In fact, part of how SideStore works is linked to Apple’s Developer Enterprise Program.

This program or its provisioning profile system is meant for developers to test apps. These apps then use a personal developer account to sign and install them on the device using Apple’s official methods.

Apple also uses certain services to verify app authenticity. To bypass these, SideStore uses a temporary third-party VPN to establish an alternate connection to route the installation process for external apps outside the standard App Store’s verification flow.

READ MORE: How to Sideload Apps on Google TV & Android TV ➜

Potential Issues with SideStore

SideStore, with the way it works, isn’t the perfect sideloading solution. It is criticized for a lot of stability issues, mainly due to the way it operates. Most of these issues stem from the need to refresh sideloaded apps weekly.

Here’s a quick rundown of some of the more common issues assosiated with the service:

1. Crashes During Weekly App Refresh: SideStore must refresh third-party apps’ signatures with new, valid certificates. Most of the time, however, the service crashes before it can refresh itself. There is a dedicated GitHub discussion forum that addresses this issue.
2. Can’t Refresh Apps via Shortcuts: The “Refresh all Apps” functionality within the Shortcuts app may sometimes fail to work. This is because the service can’t find a “pairing file” that is to be stored locally on your phone. There is a dedicated GitHub discussion forum that addresses this issue.
3. Unable to Launch SideStore: The app sometimes crashes after a fresh install before the expiry period ends. This issue is discussed in detail below.

READ MORE: How to Sideload Android Apps on Windows 11? ➜

How to Fix Issues with Launching SideStore?

This section will list all possible steps to take to identify and subsequently resolve the issue with SideStore not launching. Make sure that you proceed stepwise and follow all possible recommendations until the app opens without crashing.

1) Close and Reopen SideStore

If any app on your iPhone is buggy, laggy, unresponsive, or starts crashing altogether, try closing it from your recent apps. In the context of SideStore, particularly if you’ve correctly installed the app and have been using it for a long time, it’s more than likely that the issue lies within your device.

To close any app on your iPhone,

1. Swipe up to the Home Screen.
2. From the Home Screen, swipe up from the bottom of the screen, pausing in the middle this time.
3. Swipe right or left and find SideStore within your recent apps (even if it crashes, you’ll still see the app in your Recents).
4. Swipe up on the preview (which most likely would be a blank screen) to close the app.

2) Restart Your iPhone

If SideStore isn’t responding or fails to open altogether, try restarting your iPhone. This method should be used as a basic troubleshooting step for all issues, as it can sometimes solve issues that are otherwise hard to explain.

To restart your iPhone,

1. Press and hold either of the two volume buttons on the left side and the power button on the right side.
2. When the power-off slider appears, release these buttons and drag the slider to the right to power off your device.
3. If your iPhone is completely unresponsive, force restart it by pressing and releasing the volume up and then volume down buttons, followed by holding the power button on the right side.
4. To power your device back on, hold the power button on the right side till the Apple logo appears.

READ MORE: iPhone Force Restart Not Working? Try These 9 Easy Fixes ➜

Since SideStore is used to sideload apps from within the app, it can easily eat up a huge chunk of your device’s storage—sometimes even more than 10GB. This can reduce the free storage space on your iPhone to the bare minimum. As this happens, the phone will try to compensate and will slow down.

To solve this issue, it’s advisable to offload (not uninstall) SideStore. The reason for doing this is that iOS and iPadOS don’t have a dedicated option to clear app data like Android does. Offloading the app keeps the app data but removes the app itself. You can then reinstall the app, which will be comparatively lighter and consume fewer resources than before.

It is important to note that while this will free up a bit of storage space, you may need to sideload some of the already installed apps again on your device. To offload an app on iOS,

1. Open your phone’s Settings.
2. Go to General > iPhone Storage.
3. Scroll down and tap on SideStore or the app you want to offload (we’ll be using WhatsApp as an example for this guide).
4. Tap “Offload App.”

READ MORE: What are Haptics on iPhone? Taptic Engine Explained ➜

4) Check for Proper Installation Procedures

Users who have recently installed SideStore are aware that the service itself has to be sideloaded onto their device via an external PC. The process can be a bit tedious, especially for Windows users, which is why it is possible that the correct installation procedures aren’t followed.

One such error relevant to the situation is that SideStore does not refresh right after installation. While the app does show a 7-day expiry period, a bug causing early expiry will prevent you from opening the app altogether. This happens because SideStore itself is operating on a temporary license certificate that needs to be refreshed periodically.

To fix this, refresh the app immediately after installing SideStore. The developers have mentioned plans for a future update that will automatically update and refresh the app, but this must be done manually for now.

5) Manually Refresh SideStore

If SideStore fails to launch or crashes, the most reliable solution is to refresh the app itself. You will generally find the option to do this within the app. However, for most users, all apps except SideStore refresh normally.

The solution to this issue is to find a newer version of SideStore in the .ipa format. You can usually do this by joining the company’s Discord server. From there, install the IPA file as you would for any other app, and voilà, SideStore will refresh itself.

What if it Doesn’t Work?

In a lot of scenarios, SideStore might fail to update. More often than not, the issue here is tied to the app’s pairing file, which needs to be refreshed.

To refresh the pairing file:

1. Open SideStore and go to Settings.
2. Under the Debug section, look for the option of “Reset pairing file.“
3. Download Jitterbug from GitHub onto your PC.
4. Connect your iPhone or iPad to the PC and run jitterbug.exe. A prompt will pop up on the phone asking for trust permissions.
5. Re-run jitterbug.exe, and it will create a new pairing file.

READ MORE: iOS 16 Jailbreak – Current Status & Everything to Know [2024] ➜

Conclusion

SideStore is riddled with all sorts of bugs and glitches, which can start to surface as new versions of iOS or iPadOS are released. Nevertheless, the issues with using it require a bit of technical know-how to troubleshoot. This guide has listed all the necessary steps to be taken to ensure that the issues with the app not launching are identified and subsequently resolved.

The post Unable to Launch SideStore? Try These 5 Easy Fixes! [2024] appeared first on Appuals.

How Quitting Apps Works on Mac

Closing down apps on a Mac slightly varies from how the procedure normally is on Windows systems. Within macOS, closing the app window, using the red cross in the title bar usually doesn’t quit the app entirely. The app icon will still appear in the Dock with a dot underneath, showcasing how it’s still running in the background.

1) Quitting the Apps Normally

The red cross within the title bar won’t quit the app, but it would, in normal circumstances, close the window you’re working on. This may not apply to some apps that are open in a single window. For this reason, to completely quit the app, you can use either of the three methods listed below:

1. Keyboard Shortcut: Press Command (⌘) + Q on your keyboard to close any app. To verify the app you’re about to close, check the top-left hand side of the menu bar that would have the name of the app in focus written besides the Apple logo.
2. Menu Bar: In the menu bar, click on the app’s name (on the right hand side of the Apple logo, in the top left corner). From the dropdown menu, select “Quit.”

   

3. Dock: In the Dock, for an app with a small white dot beneath it, right-click on its icon, and select “Quit.”

   

2) Force Quit

If an app becomes unresponsive or fails to close normally, you can choose to force quit it. Keep in mind however that this approach immediately terminates the app, without allowing it to perform any sorts of cleanup routines. What this means is that any work that you potentially may have unsaved, within the app, will be lost.

READ MORE: How to Fix a Non-Responsive Finder on Your Mac (appuals.com)

How to Force Quit on Mac

On Mac, you can force quit an app in different ways, depending on the convenience and how it sits in with your workflow. You can either choose to close the app via keyboard shortcuts, the Dock, force quit menu, or the built-in Terminal.

Method 1: Force Quit Applications Menu

macOS has an integrated force quit menu, where you can choose multiple apps to terminate, all at once. You can either use the keyboard shortcut — Command + Option + Esc — to open this window, or click the Apple logo on the top left hand side and select Force Quit.

With this window open, you’ll simply need to select the app to close and click “Force Quit” in the bottom right-hand side of the window.

Method 2: Force Quit via Dock

In certain scenarios, apps take a long time to load before starting up. This can sometimes eat up a lot of system resources, and can make your system unresponsive. In such cases, you can force quit the application by Control-clicking its icon in the Dock and selecting “Force Quit.“

Method 3: Mac’s Activity Monitor

Similar to the Task Manager on Windows, macOS has its own “Activity Monitor,” which functions in, more or less, the same way. To force quit an unresponsive app, select it in the Activity Monitor window and click the “Force Quit” icon located in the top left corner.

While there isn’t a direct keyboard shortcut to launch Activity Monitor itself, you can access it quickly through Launchpad or by using Spotlight Search with the keyboard shortcut Command + Space.

Method 4: Terminal

To force close an application with multiple ongoing processes in the background, it is recommended to use the Terminal. Simply, open it up and type in “killall [appname]” and press Enter. This command will terminate all running instances of the application, including its background processes.

READ MORE: How to Delete a User on Mac in 2 Easy Steps [2024] ➜

Why & When to Force Quit

At times you may come across situations where an app is buggy, or unresponsive; meaning it won’t quit on its own. In that case, you may need to force close an application. However, there are other scenarios too, to keep in mind, for when you should force quit an app, or in some cases, the system itself.

1. The app in focus is behaving unusually.
2. If your screen displays unusual artifacts out of nowhere.
3. If you accidentally opened an app that takes a long time to load and won’t close normally.
4. The app or service is taking a considerable amount of your PC’s resources for no apparent reason. Keep in mind that some system apps are actually meant to serve a purpose behind the scenes.
5. If your entire system is completely frozen.
6. If your mouse or keyboard input becomes unresponsive, but the screen and other apps are still functioning properly.

 Is it Safe to Force Quit an App?

While force quitting out of an app is generally considered to be a mandatory action, some people may find it unsafe, and hence would rather wait for a frozen system to respond again than to say, try and force quit an app. Even worse, some myths claim that even using the power button to force shut down the system is dangerous.

Many people consider turning off their PC via the power button an “unsafe” way to do so. However, in reality, it serves the exact same purpose as using the built-in shutdown command, which means that there is no harm in using the physical button to force-shut down your system as a last resort if you can’t even force-quit a particular app.

READ MORE: How To Play Windows Games on Mac – Detailed Guide ➜

Conclusion

While closing unresponsive apps can be incredibly frustrating, macOS has several methods to forcefully close them, ranging from using the Dock to terminating all instances via the Terminal command-line tool. Since all of these essentially do the same exact thing, either of them can be used by users depending upon what suits their workflow the best.

The post How to Force Quit Any App on Mac: 4 Easy Ways [2024] appeared first on Appuals.

When CarPlay fails to work properly, it can be a significant inconvenience. This guide will take you through practical troubleshooting steps to resolve common CarPlay issues, ensuring you can enjoy a hassle-free driving experience again.

Whether it’s a connection problem, software glitch, or settings issue, these solutions will help you fix CarPlay and make your drives smoother and safer.

What is Apple CarPlay, and how does it work?

Apple CarPlay integrates your iPhone with your car’s infotainment system, allowing you to access key functions safely while driving. It provides navigation, communication, and entertainment through your car’s built-in display and controls.

With CarPlay, you can use Apple, Google, or Waze for directions and traffic updates. You can make calls, send and receive messages, and listen to voicemails hands-free with Siri.

For entertainment, CarPlay lets you access music, podcasts, and audiobooks through apps like Apple Music and Spotify. It supports other apps for weather news and select third-party applications for a customized driving experience.

READ MORE: iPhone Charging but CarPlay not Working? Try These Fixes! ➜

Reasons why Apple CarPlay might not be working?

Apple CarPlay might not work for several reasons, ranging from simple connection issues to more complex software problems. Here are some common causes:

• Connection issues: Problems with the USB cable or port can prevent CarPlay from connecting correctly.
• CarPlay not enabled: CarPlay might not be enabled in your iPhone’s settings.
• Outdated software: Older versions of iOS or your car’s infotainment system software may cause compatibility issues.
• Wireless connectivity problems: Wireless CarPlay requires Bluetooth and Wi-Fi to be enabled and functioning correctly.
• Device interference: Other connected Bluetooth devices may interfere with CarPlay’s connection.
• Screen Time restrictions: CarPlay might be restricted under Screen Time settings on your iPhone.
• Faulty hardware: Issues with the car’s infotainment system or the iPhone can also prevent CarPlay from working.

READ MORE: How to Enable Siri for CarPlay in 2 Easy Steps [2024] ➜

How to resolve the Apple CarPlay not working issue?

If your Apple CarPlay isn’t working, you can take several troubleshooting steps to resolve the issue. Follow these tips to get your CarPlay up and running smoothly again:

1. Make sure CarPlay is enabled on your iPhone

To resolve issues with Apple CarPlay not working, you first need to ensure that CarPlay is enabled on your iPhone. Sometimes, CarPlay might get turned off accidentally or due to software updates. 

Enabling CarPlay involves a few simple steps, and ensuring it isn’t restricted in your Screen Time settings can be crucial. Here’s how to do it:

1. Open the Settings app on your iPhone and tap on “General.
   

   

2. Select “CarPlay.”
   

   

3. Look for your car in the “My Cars” section. If your car isn’t listed, press and hold the voice control button on your car’s steering wheel to initiate the setup and pair your car with your phone.
   

   

Ensure that CarPlay isn’t restricted in Screen Time settings

Your Screen Time settings might restrict Apple CarPlay from running properly or even getting started. Here’s how to make sure you have the correct Screen Time settings:

1. Return to the Settings main page and tap “Screen Time.”
   

   

2. If Screen Time is enabled, tap “Content & Privacy Restrictions.”
   

   

3. Select “Allowed Apps & Features“. 
   

   

4. Ensure that CarPlay is enabled by swiping the button to the right.
   

   

READ MORE: Apple Screen Time Not Working? Try These 19 Easy Fixes ➜

2. Enable CarPlay when your phone is locked

For a flawless CarPlay experience, you must enable CarPlay to function even when your iPhone is locked. If this setting is disabled, CarPlay might disconnect or fail to operate correctly once the phone’s screen turns off.

Enabling CarPlay while your phone is locked ensures you can use CarPlay without interruptions, even when your phone screen turns off. Here’s how to make sure this setting is enabled:

1. Open the Settings app on your iPhone and  select “General.
   

   

2. Choose “CarPlay.”
   

   

3. Tap your car in the list of connected vehicles.
   

   

4. Ensure that “Allow CarPlay While Locked” is turned on by swiping the button to the right.
   

   

3. Ensure Siri is enabled

Siri plays a crucial role in the functionality of Apple CarPlay, allowing you to control various features using voice commands. If Siri is not enabled, CarPlay may not work as expected. Here’s how to check and enable Siri on your iPhone:

1. Open the Settings app on your iPhone. Scroll down and tap on “Siri & Search.”
   

   

2. Ensure that the following options are enabled by swiping the buttons to the right:

• Listen for “Hey Siri”
• Press Side Button for Siri (on iPhones with Face ID)
• Press Home for Siri (on iPhones with a Home button)
• Allow Siri When Locked
  

  

4. Restart your iPhone and car

Sometimes, the simplest solutions can resolve complex issues. Restarting your iPhone and car can clear any temporary glitches or corrupted data that might prevent CarPlay from working properly. To restart your car, turn off the engine, wait for a few seconds, and turn the engine back on. Here’s how to restart your devices:

For iPhone X and later:

1. Press and hold the Volume and Side buttons until the power-off slider appears.
   

   

2. Drag the slider, then wait 30 seconds for your device to turn off. Press and hold the Side button to turn your device back on until you see the Apple logo.
   

   

For iPhone 8 and earlier:

1. Press and hold the Top (or Side) button until the power-off slider appears.
   

   

2. Drag the slider, then wait 30 seconds for your device to turn off. Press and hold the Top (or Side) button to turn your device back on until you see the Apple logo.
   

   

READ MORE: iPhone Force Restart Not Working? Try These 9 Easy Fixes ➜

5. Double-check your USB cable

If you are using a wired connection for Apple CarPlay, it is essential to ensure that your USB cable is in good condition and is Apple-certified. An undamaged, Apple-certified USB cable ensures a stable and reliable connection between your iPhone and your car’s infotainment system.

Non-certified or damaged cables may not support CarPlay, leading to connectivity issues or complete failure of the feature. Inspect your USB cable for any signs of wear or damage. If the cable is damaged, replace it with a new Apple-certified one.

READ MORE: What is USB Power Delivery? USB-PD & Its Types Explained ➜

6. Reconnect CarPlay

If your CarPlay connection has become corrupted or is not working correctly, you may need to forget and reconnect your car in the CarPlay settings. This process involves removing the existing connection and setting it up from scratch. Here’s how to forget and reconnect the car in CarPlay settings:

1. Open the Settings app on your iPhone and choose “General.”
   

   

2. Tap” CarPlay.”
   

   

3. Select your car from the list of connected vehicles.
   

   

4. Tap “Forget This Car” to remove the existing connection.
   

   

Once you do this, you must add and reset the CarPlay connection from scratch. Here’s how to do it:

For wired connection:

1. Ensure your iPhone is connected to your car using an Apple-certified USB cable. Turn on your car’s infotainment system.
   

   

2. Press and hold the voice command button on your car’s steering wheel to start the setup process.
   

   

3. A prompt to enable CarPlay will appear on your iPhone. Select “Use USB Only” and then follow the on-screen instructions to complete the setup.
   

   

For wireless connection:

1. Ensure both Bluetooth and Wi-Fi are enabled on your iPhone.  Turn on your car’s infotainment system.
   

   

2. Press and hold the voice command button on your car’s steering wheel to start the setup process.
   

   

3. On your iPhone, go to Settings > General > CarPlay.
   

   

4. Tap “Available Cars” and select your car from the list.
   

   

Follow the on-screen instructions to complete the setup.

READ MORE: The Best Wireless Apple CarPlay Adapters In 2024 ➜

7. Check for the latest updates

Keeping your iPhone and car’s firmware updated is crucial for ensuring the smooth functionality of Apple CarPlay. Updates often include bug fixes, performance improvements, and new features that enhance the overall experience. Here are the steps to check and install updates on iPhone:

1. On your iPhone, go to Settings and then “General.”
   

   

2. Tap “Software Update.” Your iPhone will check for available updates.
   

   

3. If an update is available, tap “Download and Install.” Follow the on-screen instructions to complete the update.
   

   

Updating your car’s firmware

Check your car’s manual or the manufacturer’s website for instructions on updating the firmware. Some updates may require a visit to the dealership, where professionals can update the car’s system. If available, download the firmware update from the manufacturer’s website and follow the installation instructions.

Additional troubleshooting tips

If you’ve tried all the basic troubleshooting steps and CarPlay is still not working, here are some additional steps you can take:

Ensure your car model supports CarPlay

Verify that your car model supports CarPlay by checking the manual or visiting the manufacturer’s website. The CarPlay logo on the car’s infotainment system often indicates support.

Contacting Apple Support if issues persist

If you’ve tried all the troubleshooting steps and CarPlay still isn’t working, it might be time to seek professional help. Contact Apple Support for further assistance:

• Use the website: Go to Apple Support and search for CarPlay issues.
• Use the support app: Open the Apple Support app on your iPhone to get personalized help.
• Visit an Apple Store: If needed, visit your nearest Apple Store for in-person assistance.

READ MORE: How to Contact Snapchat Support in 2024 [4 Different Ways] ➜

Final thoughts

While Apple CarPlay is a convenient and safe way to use your iPhone’s features while driving, issues can arise that disrupt its functionality. You can often resolve these issues by ensuring your settings are correct, your software is up-to-date, and connections are correctly established.

If problems persist, don’t hesitate to contact Apple Support for further assistance. Keeping CarPlay in optimal working condition enhances your driving experience by providing seamless navigation, communication, and entertainment access.

The post 7 Easy Fixes for Apple CarPlay Not Working [2024] appeared first on Appuals.

Despite its usefulness, many users are unaware of how to effectively utilize this feature or enhance their recordings with sound and additional functionalities. This guide will provide straightforward steps to master screen recording on your iPhone, explore its limitations, and discover third-party apps that offer advanced capabilities.

How does screen recording work on iPhone?

The screen recording feature on the iPhone is integrated into the iOS operating system, providing users with an easy and in-built way to capture video footage of their screen activities. This built-in tool is accessible through the Control Center, making it readily available with just a few taps.

When activated, the screen recording function captures everything that appears on your screen in real time, from app interactions to live video playback. It’s designed to be flexible, allowing you to include or exclude sounds of your choice. The tool records video files that can be immediately accessed, edited, and shared from your iPhone’s Photos app.

This feature helps create how-to videos, record gameplay, ordocument software bugs. It operates in the background, usually allowing you to use your phone while recording.

The integration with iOS ensures that it maintains a balance between functionality and battery efficiency, automatically adjusting video quality based on the device’s performance at the time of recording.

READ MORE: How to Record FaceTime with Audio on iPhone & Mac ➜

How to screen record on an iPhone?

Screen recording on your iPhone can be incredibly useful for various reasons. Here’s a step-by-step guide to using the screen recording feature built into your iOS device:

Step 1: Enable screen recording

To use the screen recording feature on your iPhone, you must first ensure it’s added to your Control Center for easy access. Follow these steps:

1. Open the Settings app on your iPhone.
   

   

2. Scroll down and tap on “Control Center.”
   

   

3. Find “Screen Recording” from the list of more controls and tap the green plus icon next to Screen Recording to add it to the included controls in the Control Center.
   

   

This step makes the screen recording icon available whenever you access your Control Center.

Step 2: Start recording

Once screen recording is enabled in your Control Center, you can start recording your screen with just a few taps:

1. Swipe down from the upper-right corner of your screen to open the Control Center (or up from the bottom edge on models with a Home button).
   

   

2. Tap the circular Screen Recording icon to begin a three-second countdown, giving you time to prepare your screen for recording.
   

   

Recording with sound

If you wish to include audio from your microphone in the recording:

1. Press and hold the Screen Recording button.
   

   

2. Tap “Microphone Audio” to turn it on (it will turn red), then tap Start Recording.
   

   

Step 3: Capture your activity and stop the recording

Here’s how to manage your recording session:

1. Perform the activities you want to record on your screen and to stop recording, tap the red status bar at the top of your screen.
   

   

2. Then, select “Red box” in the white circle.
   

   

3. Alternatively, you can reopen the Control Center and tap the Screen Recording icon.
   

   

Step 4: Access, edit, and share your recording

Once you’ve stopped recording, the video file will be saved automatically to your Photos app. Here’s how to access and manage your recording:

1. Open the “Photos” app.
   

   

2. Select the “Albums” tab and scroll to “Media Types.” Tap on “Videos” or “Screen Recordings” if available.
   

   

3. Choose the recording. Here, you can play back the video, edit it by trimming or applying filters, and share it via standard sharing options available in iOS.
   

   

READ MORE: How to Mirror and Record iPhone Screen for Free (with 5KPlayer) ➜

Using third-party apps for enhanced features

While your iPhone’s built-in screen recording tool efficiently captures basic screen activities, third-party apps like Record It! and V Recorder offer enhanced capabilities that significantly improve your screen recording experience.

These applications have additional functionalities unavailable with the standard iOS tool, catering to more specific user needs.

1. Record It

Record It! Screen Recorder is a versatile app that integrates screen recording with video editing features, making it ideal for creating polished videos. It allows you to add reactions using the Face Cam feature, perfect for reaction videos or adding a personal touch to tutorials.

The app includes a strong video editor to trim videos, adjust playback speeds, and add filters. Record It! also supports audio commentary, which can be added directly to the video for those who need to provide explanations or commentary.

2. V Recorder

V Recorder offers high-quality screen recordings with customizable settings such as resolution and frame rate. The app has a comprehensive editing suite, which includes tools for adding text, stickers, and music to your videos, enhancing visual and auditory appeal.

V Recorder supports live streaming, allowing users to broadcast their screen activities directly to platforms like YouTube, Facebook, and X (formerly Twitter). Its fun voice changer effects and various background music options make it a favorite among users looking to create engaging and entertaining content.

Advanced tips and tricks for screen recording on iPhone

Here are some advanced tips and tricks for power users looking to enhance their screen recording experience:

• Use QuickTime for Mac: Connect your iPhone to a Mac and use QuickTime Player for high-quality screen recordings. This method allows you to save files directly to your Mac, offering better control over video resolution and quality.
• Adjust settings for optimal performance: Close unnecessary apps to free up system resources before recording, ensuring smoother performance during the recording.
• Enhance audio quality: Use an external microphone when recording your screen with audio commentary for clearer, professional-quality sound.
• Utilize screen mirroring: If you need to record a live demonstration, screen mirror your iPhone to an Apple TV or compatible smart TV for a larger display, making it easier to capture detailed interactions.
• Explore keyboard shortcuts: When connected to a Mac, learn and use QuickTime Player keyboard shortcuts to start, stop, and manage recordings efficiently without disrupting your workflow.

READ MORE: How to Record WhatsApp Calls on Any Device: The Ultimate Guide ➜

Final thoughts

The screen recording feature on your iPhone can significantly enhance how you share and save content. Whether you opt for the simplicity of iOS’s built-in tool or the enhanced capabilities of third-party apps, the possibilities are vast.

As you become more familiar with these tools, experimenting with advanced techniques and settings can refine your recordings, making them more valuable and engaging. Embrace these tips and tricks to unlock the full potential of screen recording on your iPhone.

The post How to Screen Record on iPhone in 4 Easy Steps [2024] appeared first on Appuals.

In such cases, you do have the option to simply turn off the ringer on your Mac, and this guide will go into detail to explain the steps to do just that.

What is Ringer on MacBook?

The term “Ringer” is generally used when referring to Apple devices, although its meaning and functionality aren’t specifically limited to a single device or product. Essentially, it is a switch or toggle that plays a sound or vibration to alert you of any incoming calls or notifications.

In simple terms, if the ringer is on, it will play a sound when you receive a call, notification, or message, and will remain silent when turned off. In the latter scenario, all notifications will be delivered silently.

READ MORE: Troubleshoot iPhone Alarm Issues: How to Fix a Silent Alarm Issue ➜

Continuity in Apple Devices

In the Apple ecosystem, if you sign in with the same Apple ID on all your devices, you have the option to use Continuity features, which include but are not limited to wirelessly sending documents, files, images, and more to a nearby Apple device.

Continuity extends your workflow by allowing you to share your screen, universally control another device (such as using your MacBook trackpad to control an iPad), or even unlock a Mac with your Apple Watch.

In the same way, you also have the option to recieve or make calls from your MacBook using the same network as your iPhone. When this happens any call that you recieve on your iPhone will ring on your Mac, thus the term ringer is used for Mac devices here. Keep in mind that a Mac doesn’t have a dedicated ringer of its own and the term in generally limited to iPhone and iPad devices.

READ MORE: iPhone Continuity Camera Not Working? Try these Fixes ➜

How to Turn Ringer off on MacBook?

The procedures below will outline multiple ways to silence calls, messages and other notifications separately and collectively on your MacBook. These will be segregated into:

1. Call Notifications
2. Messages
3. All Notifications and Audio

1. Silencing Call Notifications

To silence the ringer on your MacBook for calls routed through Continuity (from your iPhone), you’ll need to focus on FaceTime settings, since all such call notifications come through the FaceTime app.

Method 1: Silencing FaceTime Notifications on Mac

Silencing notifications for FaceTime will prevent your MacBook from ringing or alerting you of incoming calls forwarded from your iPhone. Here’s how you can do that:

1. Open System Settings. (Click on Apple menu  > System Settings)

   

2. Click on Notifications and find “FaceTime.”

   

3. Click on FaceTime and toggle off “Allow Notifications.”

   

4. All notifications from FaceTime will be silenced.

READ MORE: Very Slow Charging Speed on MacBook? Try these fixes! ➜

Method 2: Disable Call Routing to Mac from iPhone

Since disabling all FaceTime notifications on Mac will stop any sorts of alerts from the app, you can turn off Continuity features for calls solely via the iPhone itself. Here’s how you can do that:

1. Go to Settings.
2. Scroll down and tap on “Phone.”
3. Tap on “Calls on Other Devices.”
4. From here, turn the toggle off for any devices you don’t want your calls routed to.

2. Turning off Message Notifications

Turning off the ringer on your MacBook for your Messages will silence any incoming messages either using cellular connectivity or iMessage.

Method 1: Silencing “Messages” App Notifications on Mac

To block notifications for any incoming texts on your Mac, you’ll need to turn off notifications for the Messages app. Here’s how you can do that:

1. Open System Settings. (Click on Apple menu  > System Settings)

   

2. Click on Notifications and find “Messages.”

   

3. Click on Messages and toggle off “Allow Notifications.”

   

4. All notifications from Messages will be silenced.

READ MORE: How to Turn Off iMessage Notifications on Mac ➜

Method 2: Signing into a Different Apple ID

To silence all sorts of notifications from your Mac without explicitly turning off notifications for any app, you can simply choose to use a different Apple ID, if you have one. However, this isn’t recommended as your data, such as contacts, photos, and notes, won’t be automatically synced between devices with different Apple IDs.

Not only that, but any purchases that you make on one of your Apple IDs won’t be reflected on the other. Apple’s ecosystem is designed to work seamlessly with a single account, and disrupting this can disturb your normal day-to-day workflow.

If you still wish to use separate accounts on different devices, Apple has a detailed guide that lays down the methodology for doing so.

READ MORE: How to Create Your Apple ID without Credit Card ➜

3. Silencing All Notifications (Calls, Messages & Audio)

If you want to completely mute all audio coming out of your MacBook and silence all sorts of notifications entirely, you will need to mute the audio on your device. Here’s how you can do it:

1. Open the Control Center.
2. Look for Sound section underneath the Display (Brightness) slider.
3. Turn the volume slider all the way to the left.

On older MacBook Pros with a Touch Bar, you can simply tap the Mute button to silence all audio and notifications.

Conclusion

Within the Apple ecosystem, Continuity allows you to switch seamlessly between your devices. Part of this is making or receiving calls from your iPhone on your MacBook. This feature is handled by FaceTime, and so, if you want to disable the ringer on your MacBook, simply disable notifications for FaceTime, or disable any sorts of call forwarding from your iPhone to other devices.

The post How to Turn Ringer Off on MacBook – 4 Easy Methods [2024] appeared first on Appuals.

One frustrating issue that can arise during these updates is “iPad could not be restored error 4013,” leaving users with little more than an “unknown error occurred” message.

Although Apple labels this as an “unknown” error due to its wide range of potential causes, several troubleshooting steps can effectively resolve error 4013 and related issues, such as errors 4005 and 4014, with a bit of guidance. This guide aims to simplify the process and help you swiftly return to using your device without disruption.

What is the “iPad could not be restored error 4013?”

When you try to give your iPad a new update or restore it to a previous state, you could encounter a problem known as Error 4013. This particular error appears with a notification saying, “The iPad could not be restored. An unknown error occurred (4013).

This error occurs when you are trying to update your iPad by connecting it to your PC or Mac. Essentially, this issue is closely associated with hardware-related problems. 

It often points to complications in the USB connection that links the iPad to the computer or could signal troubles within the iPad’s hardware components.

READ MORE: iPhone or iPad cannot be synced due to an unknown error – 39 ➜

What causes this error?

The “iPad could not be restored. An unknown error occurred (4013),” or iPad Error 4013, happens for several reasons. The usual culprits include bad USB cables, glitches in software, old versions of iTunes, problems caused by antivirus software, insufficient storage, and even issues inside the iPad itself.

• Faulty USB cable or port: If the USB cable or the port on your computer isn’t working right, it can mess up the connection between your iPad and the computer, which might cause Error 4013.
• Software glitches: Sometimes, there are minor problems in iTunes or the iPad’s operating system that can stop the iPad from being updated or restored properly.
• Hardware issues: Though it’s not common, Error 4013 can sometimes point to a more significant issue with the iPad’s internal parts.
• Antivirus software interference: If your antivirus software is too strong, it might mistakenly see the process of restoring iOS as a danger, which can lead to Error 4013.
• Insufficient storage space: Error 4013 can also appear if there’s not enough free space on your iPad for the update or restoration.

READ MORE: How to Unsync iPhone from iPad: 5 Different Ways [2024] ➜

How to fix iPad error code 4013?

Dealing with iPad Error 4013 might seem daunting, but you can often solve it on your own with the proper steps. These troubleshooting tips are designed to guide you through the process smoothly and efficiently.

Whether it’s a simple cable switch or a more involved software update, following these instructions can help you get your iPad back in working order.

1. Force restart your iPad

Sometimes, a significant issue with your iOS device can be fixed by simply restarting it. This can help with small software bugs. In this situation, you’ll want to do a force restart, also known as a hard reset, which is a bit more thorough than a regular restart. After that, try updating or restoring your device again.

• For iPads without a Home button: Press and quickly release the volume button nearest to the top button. Then, press and quickly release the volume button that’s farthest from the top button. Next, press and hold the top button until the device starts again and the Apple logo appears.

• For iPads with a Home button (and iPod touch 6th generation or earlier): Press and hold both the top button and the Home button simultaneously until you see the Apple logo.

READ MORE: iPhone Force Restart Not Working? Try These 9 Easy Fixes ➜

2. Update iTunes to the latest version

A major reason why you might see the iPad error 4013 is because of software issues. Since iTunes is crucial for updating or restoring your device, having the most current version is important. 

An old version of iTunes might be why you’re running into this error. Updating iTunes, which is free, could fix the issue. Here’s how to make sure iTunes is up-to-date:

1. Open the iTunes app on your computer, connect to your iPad, and tap on “Help.”
   

   

2. Then select “Check for updates.”
   

   

3. A prompt will appear about the update’s availability, and then choose “Download iTunes.”
   

   

Images sourced from: daily doubts

For Mac users with macOS 10.13.99 or earlier, follow the steps above because newer macOS versions don’t use iTunes. Instead, Ventura users should ensure their Apple Music app and computer software are current. 

3. Update the iPadOS

Just as an outdated iTunes can lead to error 4013, missing updates on your iPad might be the issue, too. Make sure your iPad’s operating system is fully up-to-date. Installing any available updates might solve the problem. Here’s how to update your iPadOS:

1. Start by opening the Settings app on your iPad. Tap on “General” and then choose “Software Update.”
   

   

2. If there’s an update waiting, hit the option to “Download and install it.”
   

   

Updating your iPad ensures that it’s running the latest software, which can often fix various issues, including error 4013.

4. Check your USB cable and connector

Make sure you’re using the right cable for your iPad, ideally the one that came with it, which should be an Apple-certified Lightning or USB-C cable. It needs to be in good shape, with no damage. 

If you’re unsure, try using a different cable if you have an extra one. Cables from well-known brands usually work well, too, but be cautious with very cheap ones from the store. Those might only be good for charging and not for transferring data, which is what you need.

Here’s what to do:

• Use a USB cable that comes directly from Apple if possible.
• Double-check that the cable fits securely when you plug it in.
• Unplug and then plug the cable back in to make sure it’s connected properly.
• If that doesn’t help, switch to a different USB port on your computer.
• You can also try connecting your iPad to a different computer to see if that works.

READ MORE: How to Fix iPad Touch Screen Not Working Issue? ➜

5. Clean up iPad storage

Even though modern iPads have more storage than ever, running out of space is still possible. When your iPad gets too full, you might not be able to update it, leading to error 4013. Here’s a simple way to make some room:

1. First, open the Settings app on your iPad and tap on “General.
   

   

2. Next, find and tap on “iPad Storage.”
   

   

3. You can also look through your apps and decide to either offload or delete the apps you don’t use anymore.
   

   

Images sourced from: howfinity

It’s important to keep some space free on your iPad so it can run smoothly. If you’re running out of space, remember that Apple offers iCloud storage plans up to 12TB. This way, you can move some of your stuff to the cloud to free up space on your device.

6. Disable the antivirus or VPN

Sometimes, programs like antivirus, VPNs, or other security tools on your computer can stop iTunes from communicating with your iPad or iPod the right way. These programs might get in the way if you’re trying to update or restore your device. 

You probably don’t need them on during the process, so try turning them off temporarily. If turning these off helps solve the problem, you can just turn them back on after you finish.

7. Try a different device

Try updating your iPad by connecting it to a different computer if you can. Doing this helps you determine if the issue is with your computer or your iPad. If you still face the same problem on another computer and have tried different cables, the issue is likely with your device. 

READ MORE: How To Mirror iPhone or iPad to TV – 3 Methods ➜

8. Factory reset iPad from Settings 

Fixing error 4013 might require you to reset your iPad back to how it was when you first got it. Before you start, it’s a good idea to back up all your important data because this step will delete everything on your iPad.

Here’s how to do a factory reset:

1. Go to your iPad’s Settings and head to “General.”
   

   

2. Keep scrolling until you find “Reset,” then tap it.
   

   

3. From the options, select “Erase All Content and Settings.”
   

   

4. You’ll need to type in your passcode if asked to make sure you want to reset your iPad.
   

   

Images sourced from: H2TechVideos

After your iPad turns back on, the error 4013 should be fixed.

9. Restore in DFU Mode

A DFU (Device Firmware Update) restore is a bit more advanced type of reset that can often fix error 4013. It wipes your iPad entirely and installs the newest iOS version. Remember to back up all your data before you start, as this process removes everything from your device.

Here’s how to put your iPad into DFU mode:

1. Connect your iPad to your computer using a USB cable.
   

   

2. Hold down the side button and one of the volume buttons simultaneously.
   

   

3. After 8 seconds, release both buttons. (If the Apple logo shows up, that means you pressed them for too long and need to try again.)
   

   

At this point, iTunes will notify you that it has found a device in recovery mode. You are now ready to restore your iPad.

10. Contact Apply Support

If you’ve tried everything and nothing has worked, it’s time to get help from the experts. You can take your device to an authorized Apple store or contact Apple Support for professional help. Although it might be a bit of a hassle, it’s the best thing to do in challenging situations.

Thankfully, the support team at Apple Support is pretty good at solving all kinds of problems, including the tricky iPhone 4013 error. Even if they can’t fix it immediately, they’ll give you different options to get your iOS device up and running again.

READ MORE: How to Contact Snapchat Support in 2024 [4 Different Ways] ➜

How to prevent such errors from happening in the future?

To minimize the chances of encountering error 4013 or similar issues in the future when updating or restoring your iPad, consider these proactive measures:

• Regularly update software: Keep both your iOS device and your computer’s operating system, along with iTunes or Finder, up to date. Software updates often include fixes for common bugs that can lead to errors during the restore or update process.
•  Use official accessories: Always use an Apple-certified USB cable and power adapter. Third-party accessories might not maintain the same quality standards and could contribute to connection problems.
• Maintain device health: Free up storage space on your device by regularly managing your data and applications. A device close to its storage limit may encounter problems during updates or restores.
• Protect your device: Avoid exposing your device to extreme conditions, such as water damage or significant drops. Physical damage can lead to internal issues that may not be immediately noticeable but can cause errors like 4013 during software updates.
•  Regular backups: Make backing up your data a regular practice. Whether through iCloud or your computer, having recent backups ensures you can recover your data even if you need to perform a factory reset or encounter update issues.

READ MORE: How to Connect Apple Pencil to iPad: All Generations Guide ➜

Final thoughts

Dealing with the “iPad could not be restored error 4013” might seem frustrating, but don’t worry; you can fix it. You’ve got many ways to solve this, like restarting your iPad, checking your cables, updating your software, cleaning up your iPad’s space, turning off any extra security software, trying another computer, or even resetting your iPad altogether.

If all else fails, Apple Support is there to help. To avoid this problem in the future, just keep your iPad and its software up to date, use the right cables, keep your iPad clean and safe, and always back up your data. With these tips, you’ll keep your iPad running smoothly and avoid errors like 4013.

The post How to Fix “iPad Could Not be Restored” Error 4013 appeared first on Appuals.

This guide will explain what iPhone network settings are and what they control. We’ll also cover the right time to reset these settings, the steps you should try before resetting, how to reset the network settings, what to expect after the reset, and what to do if the reset doesn’t solve the issue.

What are the network settings on an iPhone, and what does it control?

Network settings on an iPhone control how your phone connects to the internet and other devices. This includes setting up Wi-Fi and mobile data, creating VPN connections for safe internet use, managing Bluetooth devices, and turning on Airplane Mode or Wi-Fi Calling. 

You can also set up a hotspot to share your phone’s internet, change your mobile carrier’s settings, and decide how your text and picture messages are sent. Knowing how to use these settings helps your iPhone connect better and work more efficiently.

READ MORE: Troubleshoot iPhone Not Connecting to Wi-Fi Issue ➜

When should you reset the network settings on your iPhone?

You should reset the network settings on your iPhone if you often run into these problems:

• Wi-Fi doesn’t connect or automatically find networks
• Your iPhone shows a “No Service” message
• Bluetooth is not working
• Issues with making or receiving calls
• Inability to communicate with 5G networks
• Calls getting cut off unexpectedly
• Issues with FaceTime not connecting or functioning
• VPN not operating correctly

READ MORE: What Does SOS Mean on iPhone? 11 Easy Methods to Fix It ➜

What should you try before you reset your network settings?

Resetting your network settings will take your iPhone back to its original settings when it came. You’ll lose all the personalized settings or parameters you set for your network. So, before resetting your network settings, consider these troubleshooting steps, which might fix your connectivity issues without a reset:

• Turn Airplane Mode on and off: This can refresh your network connection. Turn on Airplane Mode, wait a little while, and then switch it off to help your iPhone reconnect to available networks.
• Restart your iPhone: Turning your phone off and then back on can solve minor software problems affecting your network. This restart can clear up temporary glitches and improve your phone’s connectivity.
• Reconnect to your WiFi network: Sometimes, problems are solved by forgetting and reconnecting to your Wi-Fi network. In your phone’s settings, forget the network, then reconnect by typing in the Wi-Fi password again, which can help establish a stable connection.

READ MORE: How to Fix Cellular Data Not Working After Updating iPhone ➜

How do you reset network settings on an iPhone?

You can reset the network settings to fix problems with your iPhone’s cellular data, Wi-Fi, VPN, and Bluetooth. This action will delete all saved settings, like Wi-Fi passwords, saved networks, and VPN setups. Here are the steps to reset your network settings:

Step 1: Open the Settings app and go to the General section

First, find and open the Settings app on your iPhone. In the Settings, scroll down until you see “General” and then tap on it. This section includes various options, such as Siri settings, updating apps in the background, and setting the Date and time.

Step 2: Access the Transfer or Reset iPhone options

Go to the end of that list after you’re in the General settings. At the bottom, you’ll find the “Transfer or Reset iPhone” option– tap on this. Doing so takes you to a different menu where you can reset or erase all content and settings.

Step 3: Tap on the Reset options

Tap on the “Reset” option at the bottom of the page. This will take you to a new menu where you can reset different parts of your iPhone.

Step 4: Select Reset Network Settings

Look for the “Reset Network Settings” option in the Reset menu. Tap on it to remove all settings related to network connections on your iPhone, including Wi-Fi passwords and cellular preferences.

Step 5: Confirm your action

Next, your iPhone will ask for your passcode to make sure you really want to reset the network settings. This step checks that you are making this change on purpose. Enter your passcode when asked. 

After the Reset

After the reset finishes, your iPhone will turn off and on by itself, which might take a little time. Once it turns back on, you must enter your passcode to unlock your phone. If you are still facing the same issue, consider contacting your network provider or Apple Support for more help.

What happens after resetting the iPhone’s network settings?

After you reset the network settings on your iPhone, it will erase all the network information on your phone. Wi-Fi passwords, Bluetooth connections you’ve saved, VPN settings, and other network choices will be wiped out and set back to how they were when the phone was new. Your phone will forget all the networks and devices it knew before.

After resetting this, you must enter Wi-Fi passwords and manually reconnect devices. The good news is that you won’t lose any files, photos, messages, or internet history. Unlike a full factory reset, which clears everything and makes your iPhone look like new, a network reset only affects network settings.

If you’re worried about losing network passwords or settings, consider saving your iPhone’s data to iCloud before resetting. Then, you can get your settings back by restoring from iCloud later.

READ MORE: How to Reset an iPhone without Password? ➜

What do you do if resetting the network settings doesn’t fix the issue?

If resetting the network settings on your iPhone doesn’t fix your connection problems, there might be a more significant issue with other parts of your iPhone. 

In this case, you might want to reset all settings on your iPhone. This will return your iPhone to its original settings without deleting your personal data like photos, apps, and music. 

Here is how to do it:

1. Open the Settings app on your iPhone and scroll to tap on “General” to get into the general settings.
   

   

2. Select “Transfer or Reset iPhone” to find the reset options here.
   

   

3. At the bottom of this menu, you will see “Reset.” Tap on it to see the different reset choices you have.
   

   

4. Choose “Reset All Settings.”
   

   

5. You might have to enter your passcode to make sure you want to reset it.
   

   

READ MORE: Troubleshoot an iPhone that’s Freezing and Lagging ➜

Final thoughts

Resetting network settings on your iPhone can be a powerful solution when facing connectivity issues, such as Wi-Fi disconnections or mobile data troubles. Following the simple steps outlined can clean your device’s network connections, solving many common problems.

This reset erases saved network information, so you’ll need to reconnect to Wi-Fi and Bluetooth devices manually. If the reset doesn’t solve the issue, consider a more comprehensive reset of all settings. 

The post How to Reset Network Settings on iPhone in 5 Easy Steps appeared first on Appuals.